Home > News > Drilling Methods

Drilling Methods

2020-11-23

Air Rotary Drilling Method

The air rotary and down-the-hole hammer drilling systems are similar in design and function with the main difference being the ladder system, having the additional cutting action of the air-driven hammer.

Bucket Auger Drilling Method

The bucket auger is used primarily on unconsolidated material, for constructing large-diameter boreholes ranging from 24 inches to 48 inches.

Cable Tool Drilling Method

The percussion method of drilling, cable tool, churn drills, sputter, or pounders as it`s sometimes referred to, is one of the oldest cutting actions utilized in the drilling industry.

Down the Hole Drilling Method

The differences between the air rotary system and this drilling system are primarily the cutting action and the resulting cuttings. The down-the-hole hammer uses the rotary percussion cutting action through the use of a button bit.

Reverse Circulation Drilling Method

The reverse circulation drilling system is quite unlike any of the other systems profiled in that it is a very large rig requiring a big footprint for both the rig itself, as well as the machine dug settling pit.

Previous: What is a Drilled Well?

Next: Types of Wells